• NONSTOP VIBRATOR
  • NSV-i SERIES (Internal Type)
  • Pneumatic pressure vibration equipment
  • It relieves obstruction of hoper and silo.
    It can be used in the environment with lots of dusts.



The usage of Non-Stop Vibrator (Internal Type)

  • Resolve blockage (bottleneck) phenomenon of materials (power, viscous matters) to be transported from hopper and silo
  • It helps arrangement of products when transported by parts feeder or linear feeder.
  • Able to apply to various fields where vibration is required such as Specially Equipped Car(ready mixed concrete car) or vibration testing device etc.
  • In case that direct vibration is required in the water or inside of actual materials
  • In case that installation of non-embeddable or knocker types are not available since there are too many dusts

Features of Non-Stop Vibrator (Internal Type)

  • Light weight type with less noise.
  • Strong local vibration power.
  • Realize the long life span with new system of simple structure
  • Various sizes according to desired output
  • Non-oil supply product (Oilless product)
  • Able to apply to various fields because it is complete closed type (in the water etc.)

Application Example

Video

Nonstop Vibrator (Internal type) Specification

MODEL PRESSURE FORCE [N] FREQUENCY [VPM](Hz) Consumption [L/min] operating pressure Noise [dB] Weight [g] 배관구경 [mm] Weight [g]
NSV-10i 4 bar[4.07 kgf/㎠] 4 6,780(113) 6 3~6 kgf/㎠
(권장압력 : 4 이상
54 70 6 이상 권장배관구경이상
메인배관으로부터
2M 이내
6 bar [6.11 kgf/㎠] 6 8,640(144) 15
NSV-16i 4 bar[4.07 kgf/㎠] 17 5,628(93.8) 17 60 180
6 bar [6.11 kgf/㎠] 20 6,780(113) 36
NSV-22i 4 bar[4.07 kgf/㎠] 46 3,750(62.5) 32 63 420 8 이상
6 bar [6.11 kgf/㎠] 62 4,500(75) 70
NSV-30i 4 bar[4.07 kgf/㎠] 88 4,128(68.8) 65 66 850
6 bar [6.11 kgf/㎠] 116 4,878(81.3) 135
NSV-40i 4 bar[4.07 kgf/㎠] 173 3,378(56.3) 100 71 1720 10 이상
6 bar [6.11 kgf/㎠] 254 4,128(68.8) 205
NSV-50i 4 bar[4.07 kgf/㎠] 277 2,250(37.5) 150 74 3210
6 bar [6.11 kgf/㎠] 407 3,000(50) 312

※ These measurements were measured under our test conditions. And they depend on various conditions.

(TEST DATE : 2016/04/01)

Nonstop Vibrator (Internal Piston Type) Size

  A B C D E F MM NN
NSV 10i 66 22 39..1 26.9 M6 DP8 M3(Ø15) M5 M5
NSV 16i 90 34 49 41 M8 DP10 M4(Ø22)-Old
M4(Ø25)-New
M5 PT 1/8-Old
M5-New
NSV 22i 113 44 63.5 49.5 M10 DP10 M5(Ø30) PT 1/8 PT 1/8
NSV 30i 139 52 75.5 63.5 M12 DP12 M6(Ø38) PT 1/4 PT 1/4
NSV 40i 160 69 91 69 M14 DP18 M8(Ø52) PT 1/4 PT 1/4
NSV 50i 198 84 107 91 M16 DP22 M10(Ø64) PT 3/8 PT 3/8

※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.

※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.

Outside View

Braket Dimension Table

  a b c d e f g h i j k
NSV-10i 50 32 3.2 20 9.2 15 3.5 (P.C.D 15) 38 24 10.5 5.5
NSV-16i 65 40 3.2 24 14.2 22 4.5 (P.C.D 22 - OLD)
4.5 (P.C.D 25 - NEW)
50 28 12.5 6.5
NSV-22i 75 52 3.2 30 20.2 30 5.5 (P.C.D 30) 60 28 12.5 6.5
NSV-30i 100 69 5 40 24 38 6.5 (P.C.D 38) 80 38 16.5 8.5
NSV-40i 120 84 5 48 35.5 52 8.5 (P.C.D 52) 95 42 18.5 10.5
NSV-50i 140 100 5 58 45.5 64 10.5 (P.C.D 64) 115.5 58 34.5 10.5

※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.

※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.

Braket Outside View

Precautions of Non stop vibrator (Internal Type)

  • Observe working pressure (Recommended pressure: 3~6 BAR)
  • Recommended air pressure: 3~6kg/㎠
  • Recommended air temperature: 0~60℃
  • Recommended operating time: 8 hour/1 day (Warranty period : 6 months from date of purchase)
  • Prohibit to use as a power source such as motor and cylinder etc.
  • It can be an error in smooth operation such as blockage of air circuit due to oil during the supply.