The Usage of Air Cooler
- Apply to various fields in need of cooling.
- Effective in local cooling.
- In case that cooling is required in dry process and injection in machine tool.
- In case that the cooling is performed or more rapid cooling is required through normal compressed air.
Features of Air Cooler
- Temperature of discharging compressed air: -30~-40℃ (Varies according to the temperature such as air temperature)
- Realizes effective and stable performance with the new system consisting of simple structure
- 4 kinds of specifications per capacity
- Compressed air is used only (Refrigerant X & Electricity X)
|(Pressure : 7 bar [ 7.13 kgf/㎠ ], Temperature : 15℃ )||INPUT DIA.
|Flow rate at the
|Max. Flow rate
|VT-100||4 bar [4.07 kgf/㎠]||-37.3℃||66℃||166.67 L/min||233.33 L/min||~ 66 L/min||Ø8||100g|
|6 bar [6.11 kgf/㎠]||-43.8℃|
|7 bar [7.13 kgf/㎠]||-51.1℃|
|VT-400||4 bar [4.07 kgf/㎠]||-28.9℃||58℃||316.67 L/min||416.67 L/min||~ 100 L/min||Ø10||270g|
|6 bar [6.11 kgf/㎠]||-38.0℃|
|7 bar [7.13 kgf/㎠]||-43.1℃|
|VT-700||4 bar [4.07 kgf/㎠]||-19.9℃||50℃||383.33 L/min||566.67 L/min||~ 183 L/min||Ø12||570g|
|6 bar [6.11 kgf/㎠]||-30.4℃|
|7 bar [7.13 kgf/㎠]||-34.9℃|
|VT-1000||4 bar [4.07 kgf/㎠]||-15.4℃||48℃||416.67 L/min||633.33 L/min||~ 216 L/min||Ø16||970g|
|6 bar [6.11 kgf/㎠]||-27.5℃|
|7 bar [7.13 kgf/㎠]||-33.5℃|
|VT-100M||4 bar [4.07 kgf/㎠]||-24.8℃||45.5℃||80 L/min||120 L/min||~ 45 L/min||Ø6||55g|
|6 bar [6.11 kgf/㎠]||-30.5℃|
※ These measurements were measured under our test conditions. And they depend on various conditions.
(TEST TEMPERATURE : 15℃)
※ These specifications and dimensions are for reference only.
And these are subject to change without prior notice depending on the product development process of our company.
※ If processing of the assembly is required, be sure to check the actual size of the product for the relevant.
Precautions of Air Cooler
- Eliminate oil/moisture in the compressed air by installing air filter at front section (It can become reason of lower performance)
- The length of the product's input pipe(hose) should be within 1~2M from the main pipe(1/2 ~1" thick pipe).
- Observe the working pressure (Recommended pressure: 3~7 BAR)
- Recommended to use at front and shortest distance of place of usage
- In case of piping from discharging section to the place of usage (within 1-2M), Insulate external surface
- This product is an industrial pneumatic device.
Never use to food or any other way that directly affects the human body.