• PNEUMATIC CHILLER
  • SH-SERIES
  • Pneumatic Chiller
  • It can be used for various applications such as cutting and welding that require cooling.



The Usage of Pneumatic Chiller

  • It can be used for various applications such as cutting and welding that require cooling.
  • Apply to various fields in need of cooling.
  • Effective in local cooling.
  • In case that cooling is required in dry process and injection in machine tool.
  • In case that the cooling is performed or more rapid cooling is required through normal compressed air

Features of Pneumatic Chiller

  • Unlike other general cooling air conditioners, this is a device that cools/supplies compressed air-through a compressor.
  • It provides improved cooling performance (low temperature ↓, flow rate ↑) by overcoming the limitations of existing air coolers (vortex tubes).
  • It can be used for various applications such as cutting and welding that require cooling.
  • Because the compressed air is cooled, a corresponding flow rate with pressure can be continuously -supplied to the local area.
  • In addition, it can be applied in various applications where cooled air pressure is required.

Application Example

Video

SH-SERISE Specification

MODEL SH-003 SH-002 SH-010
Output capacity 1/3 HP 1/2 HP 1 HP
Voltage Will be released 220V(4A)/60Hz(1PH) Will be released
Heat of conversion 595 kcal
Max. cooling temperature -20℃
Max. flow rate 450 L/min
Purge flow rate 112 L/min
Dimension 500*700*700H
(W*L*H / unit : mm)
Weight 약 70 kgf

※ 사용주변온도 : 0~50℃ 이내, 입력압력 : 7kgf/㎠ 기준

※ SH-003, SH-010 등 기타사양은 개발완료시 추후 공개예정

※ 위의 사양은 본사의 시험조건하에서 측정된 것으로서 실제 조건에 따라 달라질 수 있습니다.

※ 본 사양 및 치수는 참고용 자료이며, 본사의 제품개발과정에 따라 사전예고 없이 변경될 수 있습니다.

SH-SERIES DIMENSION

MODEL A B C Weight
SH-003 Will be released
SH-002 700mm 500mm 700mm 70kgf
SH-010 Will be released

Outside View

Precautions of Air Cooler

  • There is a risk of electric shock to the input/output terminals of parts related to electricity.
  • Recommended air pressure: 3~6kg/㎠
  • Recommended air temperature: 0~60℃
  • Recommended operating time: 8 hour/1 day (Warranty period : 12 months from date of purchase)
  • If air pipes or the drainage discharge unit are to be removed, compressed air should be completely released beforehand
  • Do not modify, disassemble or repair the product. (* Product warranty cannot be guaranteed due to the reason)
  • Do not use fluids other than compressed air
  • It is recommended to use under the following temperature and pressure.
    Recommended oper. temp.:0~50 ℃
    Recommended oper. pressure:4~10 bar
  • Please avoid to use in humid or dusty locations
  • Do not apply excessive shock or pile heavy objects on the product.
  • SH-SERIES are designed to keep noise pollution at a minimum.
    SH-SERIES’s average noise : over 80dB
  • Be careful not to manipulate or touch anyone other than the person in charge who is familiar with the above.